Unsafe forklift practice “would have been obvious to anyone”
A worker severed three of his fingers when his hand became trapped while he was being lowered on the prongs of a forklift truck.
The incident took place at PRF Engineering’s factory in Skelmersdale, Lancashire, on 19 May last year. The company manufactures shelters for bikes and supermarket trolleys. On the day of the incident, the worker, who wishes to remain anonymous, was helping to transport a metal sheet, three metres in width.
The worker and a colleague stood on top of the sheet to stabilise it on the prongs of the forklift so it could be moved, but as the sheet was lowered the worker’s left hand became trapped and three of his fingers were severed. Surgeons managed to reattach his fingers, but he has only been able to regain partial use of his hand.
The HSE investigated the incident and found that the company hadn’t carried out a proper risk assessment for the work. HSE inspector Imran Siddiqui explained that the firm shouldn’t have allowed employees to stand on top of the forks, but should have found an alternative means to transport the sheets of metal, such as using a large metal basket.
Inspector Siddiqui said: “The company should simply not have allowed workers to stabilise sheets of metal by standing on top on them on forklift trucks. It would have been obvious to anyone witnessing this that it was unsafe.
“If PRF Engineering carried out a proper assessment of the risks its employees faced then this incident could have been avoided.”
PRF Engineering appeared at Ormskirk Magistrates’ Court on 3 September and pleaded guilty to breaching s2(1) of the HSWA 1974. It was fined £6000 and ordered to pay £5164 in costs.
After the hearing, inspector Siddiqui added: “This incident resulted in an employee suffering permanent damage to his left hand because not enough thought was put into his safety.”
SHP has attempted to contact the company for mitigation.
Approaches to managing the risks associated Musculoskeletal disorders
In this episode of the Safety & Health Podcast, we hear from Matt Birtles, Principal Ergonomics Consultant at HSE’s Science and Research Centre, about the different approaches to managing the risks associated with Musculoskeletal disorders.
Matt, an ergonomics and human factors expert, shares his thoughts on why MSDs are important, the various prevalent rates across the UK, what you can do within your own organisation and the Risk Management process surrounding MSD’s.
Unsafe forklift practice “would have been obvious to anyone”
A worker severed three of his fingers when his hand became trapped while he was being lowered on the prongs of a forklift truck.
Safety & Health Practitioner
SHP - Health and Safety News, Legislation, PPE, CPD and Resources Related Topics
Company fined as worker has leg amputated
Almost half of UK manufacturing employers have increased spending on workforce health and wellbeing
Bedding manufacturer fined after employees suffer serious injuries
Sadly Bob, it was probably the forlift operator that suggested it. “Don’t carry people on the forks” is generally drummed in as safety rule No 1 on FLT & MHE courses. The fork driver had the most to gain from this action, because he was easily able to transport the metal sheets about. I’m not all that sure that PRF was employing the others as ballast or that acting as ballast was part of their duties.
“would have been obvious to anyone”
states the headline, clearly not to the fool who stood on the forks?
And you have to ask yourself why did the operator comply with this unsafe system of work,
I`m pretty sure that FLT training does not promote this type of use? And LOLER is quite specifc about lifting of persons is it not.
Andrew,
You may be correct, as they both appear to be a dead weight`s?
Sadly PRF Engineering could not come up with a better engineering solution other than operatives standing on a suspended load.
Note to self,
Remind me never to use them for any engineering solution.
And to think , we used to be a proud engineering nation.
Another case of a lack of supervision, checking on employees as they perform tasks as well as the lack of a RA & MS.