Littleborough based company Ken Mills Engineering Ltd has been fined for safety breaches after a 48-year-old worker suffered a life-threatening injury.
A 48-year-old worker was repairing a Trojan Haylage Baler at New Hall Farm, Grange Moor, Wakefield when his left arm was trapped and crushed by a hydraulic ram. Leeds Crown Court was told. The arm was partially severed at the scene; required several operations and following medical complications was amputated from above the elbow. The incident happened on 9 February 2017
An HSE investigation found that several engineers had been involved over a number of days to repair the baler. This work had not been subject to a risk assessment and engineers were not provided with effective information, instruction and training for this activity. They were left to devise their own system of work, which consequently was not safe.
Engineers relied on techniques they were familiar with from the factory which were not suitable for the site circumstances. As a result, the vertical compaction ram was inadvertently initiated trapping the worker’s arm.
Ken Mills Engineering Ltd of Greenvale Business Park, Littleborough were found guilty of breaching Section 2 (1) of the Health & Safety at Work etc Act 1974. The company has been fined £18,000.00 and ordered to pay £50,494.18 in costs.
After the hearing, HSE inspector Louise Redgrove commented: “It was reasonably practicable for Ken Mills Engineering Ltd to have done more to ensure engineers were working safely.
“This incident could have easily been prevented if the company had assessed the repair activity; identified site specific hazards and typical custom and practice, provided a safe working procedure and then effective information, instruction and training for that procedure and the repair work that day”.