November 8, 2017

Get the SHP newsletter

Daily health and safety news, job alerts and resources

In-court

Asbestos: firm fined after failure to protect employees

A Paisley based utility services company has been fined for exposing four of its employees to asbestos.

Hamilton Sheriff Court heard that four electricians employed by IQA Operations Group Ltd had been drilling through door transom panels to fit electric cables into each property within the tower block as part of the installation of a new low voltage distribution system at Anderson Tower in Motherwell in 2014.

No measures in place

The company had identified that an asbestos survey was carried out ahead of the works starting but did not include a survey of the transom panels above each flat entrance door.

The four electricians started work on the site on 23 June 2014 and drilled holes in the door transom panels in all 44 flats. The electricians were not aware that the panels contained asbestos so no measures were in place to control exposure to airborne asbestos fibres.

On 2 July 2017, a resident raised a concern that the panels were asbestos, work was stopped, and the panels tested. The samples tested positive for asbestos. Immediate action was taken to decontaminate the flats which involved the local council making arrangements for the residents to leave their properties while the work was being done.

Failures

The Health & Safety Executive found that IQA Operations Group Ltd had failed to provide and maintain a safe system of work to identify the presence of asbestos in the transom panels and failed to carry out a suitable and sufficient assessment of risk to their employees from asbestos when carrying out cable routing work.

IQA Operations Group Ltd of 101 Abercorn Street, Paisley was fined £6,000 after pleading guilty to a breach of Section 2 (1) of the Health and Safety at Work etc. Act 1974.

Speaking after the hearing, Gerry Muir HM Inspector of Health and Safety said “This incident could have easily been avoided if the company had in place a system of work to ensure that the asbestos survey it requested to be carried out covered all of the intended work areas.

“Failing to do this resulted in 44 asbestos panels being drilled into with no measures in place to control the risk of exposure to the resultant asbestos fibres.”

The Safety Conversation Podcast: Listen now!

The Safety Conversation with SHP (previously the Safety and Health Podcast) aims to bring you the latest news, insights and legislation updates in the form of interviews, discussions and panel debates from leading figures within the profession.

Find us on Apple Podcasts, Spotify and Google Podcasts, subscribe and join the conversation today!

Related Topics

Subscribe
Notify of
guest

0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments