A Derbyshire firm that specialises in refurbishing precision machining tools has been fined £6,000 for safety breaches after a worker severed a thumb while lifting a heavy component.
45-year-old Mark Evans, from Chesterfield, was rebuilding a rotary table device at CNC Rotary in Staveley when the incident happened on 17 June 2013.
Chesterfield Magistrates’ Court heard on 17 September that he was under the management of David Helley when the incident occurred.
Mr Evans was working on the tool when it came loose from a sling attaching it to the prongs of a forklift truck that was being used to lift it. Weighing around 30kg, the tool is used for drilling or cutting work at exact intervals around a fixed axis.
As the sling slipped through the eyebolts in the rotary table, Mr Evans’ right thumb was somehow trapped by the sling and eyebolt, severing it completely and causing further tendon damage to the hand.
Mr Evans was given a skin graft to cover the damaged area and a big toe was used to replace the thumb. However, he experienced debilitating complications and was unable to work for a year.
An investigation by HSE found there was no lifting attachment to secure the sling to the forklift truck, and that the sling and eyebolts had not been thoroughly examined.
David Helley of Markham Road, Tuxford, Nottinghamshire, was fined £6,000 and ordered to pay costs of £1,514 after pleading guilty to breaching Section 2(1) of the Health and Safety at Work etc. Act 1974.
As a result of this incident, HSE inspectors also found a series of other safety breaches that required urgent attention. Prohibition Notices were issued for the use of unsuitable and untested lifting bolts/eyes, the spraying of solvent-based paint in an area where there were unprotected electrics, and one for using lead chromate and isocyanate-containing paints.
Improvement Notices were also served for training on lifting and slinging, and for a written scheme of examination for two pressure vessels in the workshop’s compressed air systems.
Speaking after the hearing, HSE inspector Steve Shaw said:
“Lifting incidents are often the result of a lack of training, the wrong equipment or the equipment being in a poor state of repair.
“It is important to have the correct equipment in place, which has been thoroughly examined so that safe lifting operations can be carried out by appropriately trained personnel. As a result of not having safe working conditions in place, Mr Evans suffered a painful, life-changing injury that could have been prevented.”
Approaches to managing the risks associated Musculoskeletal disorders
In this episode of the Safety & Health Podcast, we hear from Matt Birtles, Principal Ergonomics Consultant at HSE’s Science and Research Centre, about the different approaches to managing the risks associated with Musculoskeletal disorders.
Matt, an ergonomics and human factors expert, shares his thoughts on why MSDs are important, the various prevalent rates across the UK, what you can do within your own organisation and the Risk Management process surrounding MSD’s.
